Month: June 2013

Socketed CPU confirmed for Microserver G8

Full marks to HomeServerShow and their eagle-eyed forum poster MicroMatt who have spotted the Microserver G8 Self-Repair Remove/Replace videos.

The videos can be accessed by going to the HP Customer Self Repair Services Media Library and selecting “Servers > HP ProLiant MicroServer > HP ProLiant MicroServer G8” and then following the “Remove/Replace videos” link below the selection boxes.

Then you get a Javascript popup video which will play the videos for you. I looked at the last video entitled “System Board” and found this….

HP Repair video outs the G8 Microserver as having a CPU Socket for a replaceable (and possibly upgradable) CPU.

HP Repair video outs the G8 Microserver as having a CPU Socket for a replaceable (and possibly upgradable) CPU.

Asbestos hysteria – time to fix the problem permanently

I note a fantastic blog post today from Michael Wyres who has distilled the hysteria surrounding what appears to be a massive mishandling of asbestos-containing material during remediation works by Telstra-engaged contractors.

Call me a pessimist, but the amping up of an issue by the Coalition and their supporters (just look on Twitter for the ridiculous anger) for political gain is all bluster and bother. As Wyres writes:

To their credit, Telstra seems prepared to take responsibility for the issue. Given they are contractually obliged to do so, this seems a fairly straightforward position for them to take. Steps are already underway to make good on the issue.

This appears to go against the whole Coalition Narrative of ‘Bad policy, bad asbestos, bad government (because we didn’t win the 2010 election), stop the boats’. Once again we see a complete lack of objectivity from the right. Well done guys, your continued empty slogans, lack of credible policy and xenophobic dog whistling have stopped this coalition voter from sending my vote your way.

Malcolm Turnbull has also tried to take political advantage of the asbestos issue by stating:

“Because we will simply bring fibre out to the distribution point, the street cabinet, all of the conduits and pits beyond that – the ones outside people’s houses for example – will not be disturbed at all.”

Wyres takes a big issue with the concept of leaving a dangerous substance where it is, believing it a folly:

The thing that irks me the most is that the Coalition seems to have stuck their head in the ground – (no pun intended) – on the issue. Under [the Coalition] plan, most of the asbestos lined pits in your street, in front of your house, or even in your garden, are going to be left there.

Would you be happy with that?

No Michael. I would not be happy with that at all. Do we leave any sort of chemical contamination around the streets we live? Of course we do not just leave it there. Instead it is cleaned up, any contaminated soil for proper disposal or storage.

Why is asbestos any different?

In the last few months my employer was looking to move into a larger premises. After signing a lease and starting fitout of network cabling, our cabling contractor disturbed and found asbestos in the building. Not just sheeting but loose insulation in the roof space. This was a building I spent about 3 hours in in. Since the building does not meet the regulations surrounding asbestos, we were able to terminate the lease immediately.

It is time that we as a community work towards a full removal of asbestos in our community, whether it is Telstra pit & pipe infrastructure, or is private homes or commercial buildings.

NBN Rollout update 4th June 2013

Another week rolls by, and yet more activations of NBN fibre. Today’s update was mostly incremental, with a few Fibre Distribution Hubs (FDH’s) being made active.

NBN Fibre Area 8DRW-01 activated on June 4, 2013

NBN Fibre Area 8DRW-01 activated on June 4, 2013

The biggest thing is that there has been some partial FSAM activations in Darwin, which is a first for the NT Capital. It’s good news after many delays in Darwin and it is great to see that NBNco have been able to get some premises able to order a fibre service there. Now we hope for the same in WA which is now the only state without a Brownfield Fibre activation.

Brownfield activations were made in the following suburbs and towns:
  • Ngunnawal, ACT
  • Blacktown, NSW
  • Coffs Harbour, NSW
  • Gosford, NSW
  • Aspley, QLD
  • Townsville, QLD
  • Hobart, TAS
  • Deloraine, TAS
  • George Town, TAS
  • Launceston, TAS
  • Sandy Bay, TAS
  • Brunswick, VIC
  • Maddingley (Bacchus Marsh), VIC
  • Mill Park, VIC
  • Darwin, NT
There were also some greenfield activations in the following areas:
  • Breakfast Point, NSW
  • Lavington, NSW
  • Parramatta, NSW
  • Branyan, QLD
  • Scarborough, QLD
  • Bundoora, VIC
  • Doreen, VIC
  • Moorabbin, VIC
  • Southbank, VIC
  • Sunbury, VIC
  • Torquay, VIC
  • Wallan, VIC
  • Warragul, VIC
  • Whittlesea, VIC
  • Yuroke, VIC
  • Armadale, WA
There were some Fixed Wireless areas brought online in Queensland also:
  • Aubigny, QLD
  • Biddeston, QLD
  • Linthorpe, QLD
  • Mount Tyson, QLD

EXCLUSIVE: Internal photos of the HP Microserver G8 leaked

Well here are the photos you have all been waiting for – a world exclusive of the HP Microserver G8 with all the internal photos to answer all the questions you were after,  and a full 7 days before the Official HP product announcement.

 

HP_Microserver_G8_Int_Front

First off, we have inside the door. We see a completely different design in the G8 from the outgoing G7. The biggest changes are the stock HP Non-Hot Plug LFF Drive caddies, some of you may already be familiar with these from the DL120 servers. Also the front of the server is closed with meshed steel panelling. This is quite the change from the open fronted G7 where you could open the door to gain access to not only the hard disks in the cage, but also the internal USB port.

Other features of note include a magnetically latched door, and no apparent locking mechanism. To me, this seems like a major oversight from HP as they are positioning this model as an enterprise-ready, remote branch office basic file & print server, maybe doing local Active Directory, DHCP & DNS. As a IT Consultant that specialises in hardware and networking myself, I know how inquisitive fingers can be. If I was putting any sort of server in a remote location, I would want it locked down tight. The key lock of the G7 achieves this, but is conspicuously absent in the G8.

And yes, that thing on top we cannot tell you about yet, but there will be a reveal on this blog later this week ahead of the official HP announcement of this server at HP Discover in Las Vegas on 11-13 June.

HP_Microserver_G8_Int_FBWC

Next we pop the case off and have a look on top. We see a large rubber grommet on the top of the Microserver unit, stamped with ‘FBWC’ – or in HP jargon – Flash backed Write Cache. This is what will turn your standard disinterested RAID10-level B120i controller into a much more efficient and effective RAID5 unit.

You can look up the cost of these FBWC modules yourself, but brace yourself for some sticker shock as they are not cheap. Also, we have not yet spotted a header on the motherboard where these plug in.

On the right you can also see the quick-release tab for the slimline DVD/RW optical drive. You have seen these on most of the current G8 servers and probably some of the bigger G7’s also.

HP_Microserver_G8_Ext_Rear

We now move to the rear of the unit, where we can see two Gigabit Ethernet ports, four USB3.0 ports as previously confirmed on this blog, VGA port, dedicated iLO4 port, and a low-profile PCIe x16 slot. There’s also a standard IEC power plug for the PSU, and you will notice the sound-deadening rubber grommets around the main fan screws which help to lower noise.

One thing that may slip you attention – the quick release motherboard tray tab just underneath the main fan. Push that tab down, and as long as you have unplugged all cables in the motherboard then you can pull that entire motherboard tray out bacwards without tools. For those of us with skinned knuckles after the G7, this looks extremely easy to work on.

HP_Microserver_G8_Int_RightHandSide

We now look at the right hand side, and there are two major points of interest. First and most obvious is the two memory slots which will make memory replacement one of the easiest things you have ever done, definitely easier than upgrading the RAM in a laptop. Bravo HP, you are to be congratulated on this very intelligent design.

So what is the second thing I hear you ask? That blue tab halfway up – that’s your new door locking mechanism! Close the door, push down on the blue tab and it will lock the door shut. Still not the best or most secure solution in my eyes, but will keep most inquisitive fingers at bay.

HP_Microserver_G8_Int_LeftHandSide

Now, the side you all really want to see. A standard 150W power supply could indeed be replaced by a more efficient PicoPSU supply and leave plenty of room for at least a couple more drives, maybe you could squeeze 4 2.5″ drives or SSD’s in there.

There are plenty of other goodies in here, but we need to take a closer look.

HP_Microserver_G8_Int_LeftHandSideDetail

BOOYAH! Click on it to take a closer look!

There is plenty going on here, so lets take it one step at a time.

First off is the CPU. Now that looks like a reasonably standard Northbridge heatsink, but in this case it actually does the cooling duties for an i3-3220T CPU. This CPU has a TDP of 35W and is pretty much the limit for non-active cooling with a fan. We cannot see if there is a socket under there, but the heatsink seems to be fairly high off the motherboard so initial signs look good for a socket.

Moving left, we can see the power MOSFETs for the CPU power have a heatsink on them too. This will be helpful and make the G8 more reliable.

Further left again and we can see the HP iLO chip which houses plenty of internal smarts for out-of-band remote management. In my day job, we only use HP servers and iLO is the best remote management solution out there bar none. If you haven’t experienced iLO in an enterprise server yet, then you are in for a big surprise.

Towards the front we have the single PCIe x16 expansion slot. This is a little disappointing as many of us were using the x1 slot on the G7 for another network card, possibly a TV tuner. Personally I modded the x1 and proprietary x4 slot into open slots, and dropped a HP NC360T dual-port Gigabit Ethernet card into it. that addition gave me a total of 3 network ports which is almost a requirement for an ESXi lab machine. Hopefully I can get a USB3.0 network adapter which is on the VMware Hardware compatibility list soon.

Down the very front you can spot a MICRO SD CARD SLOT! SD card slots have been on the motherboards of a number of HP servers for a while now, but I have never seen a Micro SD card slot. This is an amazing addition to the Microservers. Next to it you can see the USB2 port for booting from a USB stick – handy for BIOS flashes, or even booting ESXi or FreeNAS from instead.

To the far right we can see a single SATA3 6.0Gbps port, whereas we had documentation leaked from HP stating two SATA3 ports on the motherboard. Now we hope the final units have two ports but I can imagine HP seeing it as a non-essential port. You have got one SATA port for the DVD drive, why do you need two? It seems like HP does not want us to have extra drives.

Finally, we can see the SAS connector on the furthermost right, again providing onboard hardware RAID to the drives in the internal LFF cage.

HP_Microserver_G8_BetaUnitSpecs

Finally, the specs of the beta machine. Please remember that this is a beta unit and specifications usually do change. That said, this unit looks reasonable close to manufacturing ready and I doubt there would be too many changes to the chassis or motherboard. About the only thing to change would be the CPU I would suggest.

I hope you have enjoyed our run-through of the beta G8 model, and stay tuned for a special top-secret reveal later this week. I would suggest subscribing to our RSS feed so you get the information as soon as we post it.

%d bloggers like this: